Mi-Light 2.4GHz 4-zone CCT remote controller FUT007

Mi-Light 4-zone CCT remote controller FUT007

This Mi-Light four-zone LED radio remote controller can be used for single colour or CCT (multi-white) lighting. The transmitter allows individual control of each zone using the radio receiver. The multifunctional remote allows you to change the brightness and colour temperature with the available buttons. This transmitter is compatible with the Mi-Light series (receivers, bulbs, downlights, etc.).

Receiver (s) need to be purchased separately. For compatible receivers please see the compatible MiBoxer products tab.

Application for installation:

MONO - single colour

CCT - with variable colour temperature (multi-white)

Characteristic features of the FUT007

 Dimming and brightening of the connected LED lighting

Control of each zone separately

Enables/disables all zones simultaneously

Two modes of operation - mono and CCT (colour temperature change)

Instant brightness reduction (night mode) 

Basic communication with the receiver is via radio. Optional Wi-Fi control, which lets you control your lighting with your mobile device (such as a smartphone or tablet), is available only through the appropriate Wi-Fi module. The cooperating devices are listed in the compatible MiBoxer products tab.

Full control - cooperation with receiving devices

Each of the Mi-light LED driver series is characterized by the ability to assign not only one device to it. Built-in invisible underneath the electronics, it works on the principle of the receiver and thus connects to our LED driver. One zone in the remote control is also not an obstacle because we can assign to it many devices such as LED bulbs, downlights and receivers working with the model. Many devices do not interfere with each other and make this connection easy to use and easy to control. Above in the compatible MiBoxer products tab you will find a full table showing all the devices that work with your model

Remote construction - control has not been so easy

Depending on the model of the transmitting device, which mainly occurs as a radio link to the receiver, various control functions can be obtained. The centre of the touch screen is the main function of the control, it is through it that we can quickly change the intensity of the light or the colour temperature in the room. At the very top of the remote control, there are buttons to enable/disable all available zones in our LED installation. Buttons for turning on / off the zone are located at the bottom of the device stacked side by side. The construction of multi-zone pilots is simple, so access to the most important functions is convenient.

Entire room within reach of the hand - zone control