Banner
Lights & Lighting, Led controller, led dimmer and accessories
Subcategories
There are 82 products.
1.GU10 socket base2.CE&RoHS,VDE,UL approved3.2A/250V/100W4.Silicon cable5.High temperature resistant
0~100% brightness adjustable Easy to install and simple to use Adjust the light soft and stable, no flickering. PWM digital dimming, avoid rush current, protect your LED lights Mainly use to adjust single color LED light lamps and Led Strip. Constant voltage and constant current output can be connected with amplifiers to extend its load.
Automatic DC 12V-24V 6A Infrared PIR Motion Sensor Switch For LED light Material:plastic and metal Type:Pir Switch. Easy to install and simple to use. Adjust the light soft and stable, no flickering.
STM32F103C8T6 ARM STM32 Minimum System Development Board Module Forarduino...
It is used to receive RGBW signal from LED controller and send the signal to another group of LED source. Supply voltage: DC12V/24V Max Load Current: 6A for each channel. Total Output of Current: 24A. Output：4 circuit. Output power：max 288W(12V), max 576W(24V)
90-264 VAC input 12 VDC output 5A Current Output/60W Full encapsulated with IP67 level Mount Holes Included
Timer controller: to achieve unattended operation, turn on/off lighting fixtures automatically according to your set-up High- compatibility: support 1 to 5 channel output for RGBW/RGB/dual color/single color LED lights Easy to use: set up different modes from your computer and download programs to controller Multi-function: color select, brightness...
[ 7 Colors Changeable & 3 Mode Brightness ]：Tap silicone rabbit body lamp to enjoy 7 single colors mode and Multicolor Breathing Dual Light Mode;Click switch on bottom to adjust the 3 levels brightness,soft light source doesn not irritate baby’s eyes,choose your favorite one to spend the night with you. [ Cute Design & Gift for Kids ]:Lovely...
Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED. PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life.. Easy Installation - Simple to install, no hard-wiring. With double-sided adhesive pads and built-in magnet, you can stick on anywhere you like...
Ceramic base with Heat resistant silicone coated wire lead (length:15cm). Pre-stripped wire ends and snap-to-fit installation for easy fitting. Socket Material: Insulating Ceramic and Metal Shrapnel. Wire Material: Copper Nickelplated and Insulating Silicon Tube. This Bulb Holder can fix your GU10 Base Bulb with 12V-240V. Two slotted holes for bulb...
Input 12V, working current 24A / 3 channels; Digital Display Decoder is designed to convert the universal standard DMX512/1990 signal into analog signal to control our RGB Flex Strips User addressable DMX interface-with easy dip-switch settings and testing modes High power output, 3 output channels, 8A per channel DMX pass through and in/out connector for...
This PIR motion sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for up to 2 minutes (full clockwise turn to 10 equals 2 minutes, and a full counterclockwise turn to 1 equals 45 seconds)....
