How to use:
1.Clean the surface from oil/dust/water.Do keep dry before put the hook on.
2.Peel off the cover starting from the bulge.
3.Press the basic of the hook to contact steady from middle to edge.Make sure the basic of the hook contact with the wall totally.
4.Test the hook by your hand.It will be Stronger to hold heavy things in hours.
Where to use:
Board / Glass / Frosted Glass / Glass Grid / Ceramic / Metal Surface / Non-paint walls / Other hard flat surface.
How to remove:
Use the hair dryer heating it, then press and hold the prominent position of the basic to remove the hook slowly. No Traces will left.
Carrys up to 13.2lb/6KG
The sticker of the hook is made of colloid which can fill little gap junctions.
Good flexibility makes it stick to surfaces strongly and stably and can take weight up to 13.2lb/6KG.
Wide application
This Traceless Hook can be applied on more surfaces even if the surface is a little bit pitted or rough.
It Can be applied to surface like wood, glass, tile, stainless and steel metal ornament, plastic article etc.
Waterproof and oilproof with temperature resistance .
Notice
1.Normally on the smooth tile surface, this hook can hold up to 13.2lb/6kg. But we'd like to suggest no more than 11lb/5kg for hoilding a long time.
2.Please clean the adhesive surface with water and dry it with hair dryer if it has dust covered before reposition the hook.
3.Please do not hang valuable and fragile items.
4.Please do wait 24 hours before attaching anything to these hooks.
5. Rough or loose painting surface is not recommended.
6. Please avoid placing on gaps and seams.
7. The adhesion is very strong that could leave a mark on rough painting walls or wallpaper when removal.
